VMC1890 Vertical Machining Center cutter metal

This VMC is suitable for mechanical processing and mold making .

And it can asapt to the processing requirement from rough machining to finish machining .

It can also finish many working procedures like milling ,drilling ,tapping ,boring ,etc.

1.The fuselage and main components are  high strength cast iron, microstructure stability, ensure the stability of machine tool for long-term use.

2.The column at the bottom of A type bridge type structure, combined with the big box base, greatly reduce  the vibration of machine on heavy cutting

3.The pre tension precision ball screw drive

4.The high speed, high precision, high rigidity spindle unit

5.The design of oil-water separation

6.The intermittent automatic lubrication

7.Automatic scraping knife system

The vertical machining center can be applied to many fields such as mechanical processing and mould manufacturing, can adapt from roughing to finishing processing requirements, has the characteristics of high precision, high efficiency, is widely used in aerospace, military industry, mould, automobile, internal combustion engines, textile machinery, chemical machinery processing, oil, electronics and other industries.

Vertical Machining Center  Features:

High quality resin sand

Taiwan spindle

Taiwan ball screw and locking nut

Taiwan pressure cylinder

Automatic lubrication system

Chip conveyor at optional

Vertical Machining Center  Application:

This VMC is suitable for mechanical processing and mold making .And it can asapt to the processing requirement from rough machining to finish machining .It can also finish many working procedures like milling ,drilling ,tapping ,boring ,etc.

Vertical Machining Center Main Technical Parameters:

Specifications	Units	VMC1890
Table size	mm	2000x900
X axis travel	mm	1800
Y axis travel	mm	900
Z axis travel	mm	800
Max. worktable load	kg	1600
T slot(number-width-pitch)		5-22x165
Max. spindle speed	rpm	6000(Optional:8000)
Spindle taper	mm	BT50
Main motor power	kw	22/26
X/Y/Z rapid traverse speed	m/min	15/15/12
Cutting feed speed	mm/min	1-5000
Guide rail type		Linear rail
Distance from spindle axis to column surface	mm	950
Distance between spindle nose and worktable surface	mm	160-900
Positioning accuracy	mm	±0.01
Repeat positioning accuracy	mm	±0.0075
Tool magazine		Arm 24
Max. tool diameter	mm	φ112 (Adjacent)/ φ200(Apart)
Max.tool weight	kg	18
Machine weight	kg	15000
Overall dimension	mm	5100x3800x3200